CNC Milled Parts, Square Parts Cut From Solid
Milling covers the parts that are not round: plates, blocks, frames, brackets, clamp arms and fixture bodies. Features are cut on 3-, 4- and 5-axis machining centres, most of them in one setup, and every batch ships with a dimensional inspection record.
Milled Parts Break Down Into Three Groups
All three are prismatic parts cut from plate or block, where parallelism, squareness and hole position decide whether the assembly goes together. Open a group to see representative parts and what we need to quote.
Milled Plates & Frames
Mounting plates, blocks and window frames — pockets, slots, bored holes and tapped holes.
View plates & frames →
Brackets & Clamps
Hinge and support brackets, mounting plates, clamp arms and structural parts.
View brackets & clamps →
Jigs, Fixtures & Dies
Workholding and inspection fixtures, fixture bodies and forming die parts.
View jigs & fixtures →Milling, Drilling and Boring, In House
Milling is the process for everything that is not turned. We cut from plate, block and extruded stock on 3-, 4- and 5-axis machining centres, then finish where the drawing calls for it. Tolerance is confirmed per drawing; milling typically holds ±0.01 mm.
3-, 4- and 5-axis milling
Prismatic parts with pockets, ribs, angled faces and curved surfaces, machined on 3-, 4- and 5-axis centres — multi-face work in one setup wherever the geometry allows.
Boring, reaming and tapping
Holes held to position and diameter: bored and reamed fits, tapped threads, counterbores and dowel-pin holes, with datums set so they land where the mating part expects them.
Finishing on request
Anodising (types II and III), powder coating, zinc and nickel plating, passivation, polishing and blackening, applied to your drawing's specification.
Milled From the Metals and Plastics Your Drawing Calls For
Typical grades below. Tell us the grade you need and we confirm availability with the quote.
Metals
- Aluminium (6061, 7075, 5052)
- Stainless steel (303, 304, 316)
- Carbon steel (1018, 1045)
- Brass (C360) and copper
Plastics
- POM (Delrin / acetal)
- PEEK
- Nylon (PA6, PA66)
- PTFE, PC, acrylic
Finishing
- Anodising and hard anodising
- Zinc / nickel plating
- Passivation, black oxide
- Polishing and sandblasting
Send a Drawing, Get a Milled-Part Quote
STEP, IGES, PDF, DWG, DXF or a photo — up to 20 MB per file. We reply within 24 hours with price, lead time and manufacturability notes.
Request a Quote →